Wood and Canvas Canoe Restoration
Tuesday, November 2, 2010

New Life for an Old Town Boat

›
Sunday, October 17, 2010

In Summary

›
Hours for Restoration:      145 Supplies from Jamestown Distributors ( jamestowndistributors.com ):      Foam Brushes and Rollers      ...
Saturday, October 16, 2010

The Seats

›
The oak seat frames were sanded before applying three coats of Epifanes Gloss Clear Varnish. After re-caning the seats, one final coat of va...
Tuesday, September 28, 2010

Primer, Paint...Primer, Paint

›
After the filler was dry, the sanded and varnished gunnels were reattached. The keel and the brass half oval stem band/keel band were also s...
Wednesday, June 2, 2010

Canvassing the Canoe

›
Before stretching the #10 Standard Mildew Resistant Canvas onto the canoe, it was turned over and lightly sanded. After the exterior of the ...
Sunday, March 14, 2010

Stripping and Sanding

›
When we took on this project, I had envisioned doing a light but thorough sanding of the interior followed by two or three coats of varnish....
Sunday, November 1, 2009

Getting Started

›
I was surprised to see the variety of woods used to construct this canoe. The planing is of western red cedar and the ribs are of northern w...
›
Home
View web version

About Us

Sawtooth Boat Works
Tom has been building hand-crafted wooden boats since 1995. Visit us at www.sawtoothboatworks.com or email us at sawtoothboatworks@gmail.com
View my complete profile
Powered by Blogger.